Immersion Heater
Perfect solution for use in a portable baptistry or existing baptistry where a circulation heater is not an option.

• Available in 120 and 240 Volt Single Phase
• Immersion section of unit made of Incoloy or Stainless Steel
• All heat confined to the formed horizontal section for optimum heat efficiency
• Cold riser extends to the top of container where control housing is located
• 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge
• Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°)
• Hi-Limit cut out switch set at 125°F (±4°)
• Stainless steel mounting bracket also supplied for easy mounting
• Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - saves money.
• The 240 Volt heater will heat 60 GPH (40° R). A 750 to 1,000 gallon Baptistry can be heated in 13 to 17 hours, or one-half this time 20 degree rise in temperature. The 120 Volt heater will heat 20 GPH (40° R). A 100 to 200 gallon baptistry can be heated in 5 to 10 hours, or one half this time for 20° rise in temperature.

PBH Mini Baptistry Heater
Recommended for portable baptistries.

• 120V
• Requires 13.5 amps
• 15' power cord with a GFCI for your protection
• completely assembled pump and heater and includes: suction and discharge fittings and the on off button. Simply mount the base down in the desired location, plumb the unit to your tank and plug it in.
• built-in thermostat will maintain constant temperature.
• will raise 200 gallons of water @ 3 degrees per hour
• FULLY ASSEMBLED

PBH 5.5 Baptistry Heater
Recommended for baptistries of 700 gallons or less.

• Voltage: Pump 120v / Heater 240v
• Amperage: 30
• Watts: 5,500
• Recommended wire size: 10 gauge
• Pump Motor: 3/4 hp
• Pump Type: Centrifugal
• Plumbing Size: 1.5" PVC
• Rate of rise: 500 gallons from 70°F to 90°F in 7 hours
• Maximum distance from pump to baptistry: 50 plumbing feet
• GFCI Protected: no
• Heating Indicator Light: yes
• Pump higher than water level: no
• FULLY ASSEMBLED

PBH 10 Baptistry Heater
Recommended for baptistries of 700 gallons or more.

• Voltage: Pump 120v / Heater 240v
• Amperage: 50
• Watts: 10,000
• Recommended wire size: 6 gauge
• Pump motor: 3/4 hp
• Pump type: Centrifugal
• Plumbing size: 1.5" PVC
• Rate of rise: 500 gallons from 70F to 90F in 4 hours
• Maximum distance from pump to baptistry: 75 plumbing feet
• GFCI Protected: no
• Heating indicator light: yes
• Pump higher than water level: no
• FULLY ASSEMBLED